Microsoft 365 + DreamHost

Set up Microsoft 365 email on DreamHost

The records Microsoft 365 needs, written with the field names DreamHost uses (Host, Custom MX Records, TXT Value, Points to), in the order to add them.

  • 6 steps
  • 7 DNS records

Before you start

  1. Have your Microsoft 365 account ready. Some values are unique to your account and come from the Microsoft 365 admin center .
  2. Open DNS at DreamHost: In the DreamHost panel, go to Manage Websites. Select the three-dot button under your domain, then DNS Settings.
  3. Keep both tabs open and add the records below one at a time.

Records to add

Copy each value with the button next to it. Rows marked “Copy from Microsoft 365 admin center” are unique to your account.

Domain verification Proves you own the domain Type TXT Host Leave empty Value Copy from Microsoft 365 admin center Looks like: MS=ms followed by digits Priority n/a TTL 3600 (1 h)
MX records Where incoming email goes Type MX Host Leave empty Value Copy from Microsoft 365 admin center Looks like: <your MX token>.mail.protection.outlook.com, or for domains set up on Microsoft's newer DNSSEC infrastructure <your MX token>.<subdomain>.mx.microsoft Priority in the value TTL 3600 (1 h)
SPF record Which servers may send as you Type TXT Host Leave empty Value v=spf1 include:spf.protection.outlook.com -all Priority n/a TTL 3600 (1 h)
DKIM A signature on every message · recommended Type CNAME Host selector1._domainkey Value Copy from Microsoft 365 admin center Looks like: selector1-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector1-yourdomain-com._domainkey.<prefix>.onmicrosoft.com) Priority n/a TTL 3600 (1 h)
DKIM A signature on every message · recommended Type CNAME Host selector2._domainkey Value Copy from Microsoft 365 admin center Looks like: selector2-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector2-yourdomain-com._domainkey.<prefix>.onmicrosoft.com) Priority n/a TTL 3600 (1 h)
DMARC record What to do with fakes · recommended Type TXT Host _dmarc Value v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com Priority n/a TTL Default
Autodiscover Automatic app setup · recommended Type CNAME Host autodiscover Value autodiscover.outlook.com Priority n/a TTL 3600 (1 h)

Step by step in DreamHost

Verify your domain

Your email provider needs proof that you control this domain before it accepts email for it.

Type
TXT
Host
Leave this field empty
TXT Value
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft 365 admin center go to Settings > Domains and add your domain (or select it and choose Start setup). On Verify you own your domain, choose Add a TXT record to the domain's DNS records and copy the TXT value.

It looks like: MS=ms followed by digits

  • Verification usually takes up to 10 minutes after adding the record, sometimes up to 48 hours.

1 more note from Microsoft 365 on this record

In DreamHost

  1. On the DNS Settings page, click Add Record.
  2. Hover over the TXT section and click ADD.
  3. Fill in Host (leave it blank for your bare domain) and TXT Value.
  4. Click Add Record to save.

Point your MX records

MX records tell other mail servers where to deliver your email. How MX works

Type
MX
Host
Leave this field empty
Custom MX Records
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft 365 admin center go to Settings > Domains, select your domain, then DNS records > Manage DNS. On the Add DNS records page, expand MX Records and copy the value.

It looks like: <your MX token>.mail.protection.outlook.com, or for domains set up on Microsoft's newer DNSSEC infrastructure <your MX token>.<subdomain>.mx.microsoft

  • Remove MX records that point to your previous email provider, or give them a lower priority (a higher number) than the Microsoft 365 record.
  • Add users and mailboxes in Microsoft 365 before switching the MX record so incoming mail keeps flowing.

2 more notes from Microsoft 365 on this record

In DreamHost

  1. Open the Custom MX page in the panel and click Edit to the right of your domain.
  2. In Custom MX Records, enter each record as the priority, a space, then the server (for example 1 ASPMX.GOOGLE.COM). Don't add @ or a final dot.
  3. Click Change this domain to use custom MX records now!

Add the SPF record

SPF lists the services allowed to send email as you. How SPF works

Type
TXT
Host
Leave this field empty
TXT Value
v=spf1 include:spf.protection.outlook.com -all
  • If an SPF record already exists, don't create a second one. Add include:spf.protection.outlook.com to the existing record so there is a single SPF record.

2 more notes from Microsoft 365 on this record

In DreamHost

  1. On the DNS Settings page, click Add Record.
  2. Hover over the TXT section and click ADD.
  3. Fill in Host (leave it blank for your bare domain) and TXT Value.
  4. Click Add Record to save.

Set up DKIM (recommended)

DKIM signs your mail so receivers can trust it. How DKIM works

Type
CNAME
Host
selector1._domainkey
Points to
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft Defender portal open Email authentication settings (security.microsoft.com/authentication), select the DKIM tab and your domain, then copy the two CNAME values. They are also shown in the admin center under Add DNS records > Advanced options > DomainKeys Identified Mail (DKIM).

It looks like: selector1-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector1-yourdomain-com._domainkey.<prefix>.onmicrosoft.com)

  • After both CNAME records resolve, turn on Sign messages for this domain with DKIM signatures in the Defender portal.
Type
CNAME
Host
selector2._domainkey
Points to
Copy it from Microsoft 365 admin center (see below)

Where to find your value

Same place as selector1: Defender portal > Email authentication settings > DKIM tab > your domain.

It looks like: selector2-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector2-yourdomain-com._domainkey.<prefix>.onmicrosoft.com)

  • Add both selector records. Microsoft rotates between them.

1 more note from Microsoft 365 on this record

In DreamHost

  1. On the DNS Settings page, click Add Record.
  2. Hover over the CNAME section and click ADD.
  3. Fill in Host (a subdomain, never the root) and Points to.
  4. Click Add Record to save.
  5. Repeat for each CNAME record above.

Add the DMARC record (recommended)

DMARC tells receivers what to do with mail that fakes your domain. How DMARC works

Type
TXT
Host
_dmarc
TXT Value
v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com
  • Replace the report address with a shared mailbox or group, not a personal inbox.

3 more notes from Microsoft 365 on this record

In DreamHost

  1. On the DNS Settings page, click Add Record.
  2. Hover over the TXT section and click ADD.
  3. Fill in Host (leave it blank for your bare domain) and TXT Value.
  4. Click Add Record to save.

Add the Autodiscover record (recommended)

Autodiscover lets Outlook and other mail apps find your account settings without manual setup.

Type
CNAME
Host
autodiscover
Points to
autodiscover.outlook.com
  • Optional but highly recommended: lets Outlook and other apps set up mailboxes automatically.

In DreamHost

  1. On the DNS Settings page, click Add Record.
  2. Hover over the CNAME section and click ADD.
  3. Fill in Host (a subdomain, never the root) and Points to.
  4. Click Add Record to save.

Check your setup

Once the records are saved, run a live check. We look up your domain in public DNS and tell you what is right, missing or wrong, with the fix in DreamHost’s words.

We only read public DNS records. Nothing is stored.

Common mistakes with Microsoft 365 on DreamHost

Switching MX before adding mailboxes

Add users and mailboxes in Microsoft 365 before changing the MX record, or incoming mail has nowhere to go.

Adding a second SPF record

Microsoft says not to create a new SPF record if one exists. Add include:spf.protection.outlook.com to the existing record so there is a single SPF record.

DreamHost: Custom MX turns off DreamHost email

Once custom MX records are added, email is no longer delivered to DreamHost and the domain's DreamHost mailboxes are deactivated.

2 more Microsoft 365 mistakes to avoid

Visit Microsoft 365 Visit DreamHost

Microsoft 365 on DreamHost: questions

Where do I add Microsoft 365 DNS records in DreamHost?

In the DreamHost panel, go to Manage Websites. Select the three-dot button under your domain, then DNS Settings. Add each record there, one at a time.

What goes in the Host field at DreamHost?

Leave it empty for records on your bare domain, such as MX and SPF. For the others, enter only the part before your domain, for example autodiscover. DreamHost adds your domain automatically.

Do I need to delete my existing MX records at DreamHost?

Remove MX records that point to your previous email provider, or give them a lower priority (a higher number) than the Microsoft 365 record. Once custom MX records are added, email is no longer delivered to DreamHost and the domain's DreamHost mailboxes are deactivated.

How long until Microsoft 365 email works on DreamHost?

DNS changes typically take about 15 minutes to take effect, occasionally longer.

Sources

Every value and step on this page comes from these official pages. Dashboards change, so if something doesn’t match what you see, tell us.

Microsoft 365 on other hosts

Other email providers on DreamHost